For live transport of cells and living tissues By combining customized devices and high-performance original temperature-controlled transport boxes, we provide a comprehensive transport system according to the distance and purpose.

What is live transport?

This method enables the “ready-to-use” transport of iPS cells and other cells without freezing them.
When cells are frozen during transport, transport can be made in a stable condition; however, there is a risk that cells may be damaged or destroyed in the return to an active state, as well as loss of time, labor costs and costs incurred for chemical agents.
Live transport provides a positive outlook in solving such problems.

IP-TECDevice developed to make live transport possible.

iP-TEC series

iP-TEC® series consists of devices for transporting cells
(Primary container, secondary container, auxiliary device) and temperature-controlled transport boxes
We provide a comprehensive transport system according to the distance and purpose.

Live Transport device for well plate and dish

Make it possible to Live Transport
with pre-existing dish and well plate!

IP-TEC Live Transport device for well plate and dish.

PAT. P

Using Medical Silicone Rubber without cytotoxic effect

Using Medical Silicone Rubber without cytotoxic effect
(United States Pharmacopoeia USP Class V1, ISO 10993-5 compliant)

We solve problems about self-adhesive film cover.
This cover does not use adhesive, you do not have to worry touching risk culture medium.
*Possible to smooth open, we can avoid contamination risk also.

No Problem liquid seal, No problem CO2 penetration

Cover consists of 2 parts. thin part, necessary to ventilation, thick part, sealing container.
Possible to seal smoothly at container opening with ultra low hardness.

Easy Live Transportation

Cover enables less quantity of culture medium with its shape, prevents flapping.
Also prevents cell and biomedical tissue at the time of transportation.

How to set(example : 6 well plate)

  • Primary container (dish, well plate) to be covered by silicone rubber cover
    ①Primary container (dish, well plate) to be covered by silicone rubber cover.
  • Put on presser plate and push to set bot tom of iP-TEC® secondary container.
    ②Put on presser plate and push to set bot tom of iP-TEC® secondary container.
  • Covers reticulate cushion. (if necessary, put on Culture Pal® CO2 with breaking the seal)
    ③Covers reticulate cushion. (if necessary, put on Culture Pal® CO2 with breaking the seal)
  • Locks four sides at the lid of secondary container with pushing contents.
    ④Locks four sides at the lid of secondary container with pushing contents.
  • Forwards iP-TEC® heat storage material after putting into third box.
    ⑤Forwards iP-TEC® heat storage material after putting into third box.

Related products

Transportation box can be selected for each purpose!

  • Tote BOX-6.6
  • Premier BOX-V8.5
  • Premier BOX-V19
  • Standard BOX-X13
  • Light BOX-S6.6

Spec

 Dish Cover
■iP-TEC® Dish Cover
Code Model Quantity Price
28504 suitable for φ35 1pc 16.50/USD
      Detail
28505 suitable for φ35 10pc 148.00/USD
      Detail
28506 suitable for φ60 1pc 18.00/USD
      Detail
28507 suitable for φ60 10pc 162.00/USD
      Detail
28508 suitable for φ90 1pc 28.00/USD
      Detail
28509 suitable for φ90 10pc 252.00/USD
      Detail

● Have finished sterilzation ● Package separately ●It can be used alcohol ●It can be used autoalave
●Size(mm)/for φ35:φ42.3×8H, for φ60:φ62×9H, for φ90:φ95.5×11H
●Material of cap: Medical grade silicone

  • Si
 Plank for Dish Cover
■iP-TEC® Plank for Dish Cover
Code Model Quantity Price
28510 suitable for φ35 1pc 16.50/USD
      Detail
28511 suitable for φ35 10pc 148.00/USD
      Detail
28512 suitable for φ60 1pc 18.00/USD
      Detail
28513 suitable for φ60 10pc 162.00/USD
      Detail
28514 suitable for φ90 1pc 21.00/USD
      Detail
28515 suitable for φ90 10pc 189.00/USD
      Detail

●Material :PVC
●Size(mm)/for φ35: φ43×5H, for φ60: φ63×5H, for φ90: φ96×5H
●nonsterile ●Package separately ●It can be used alcohol

  • PVC

注意

●Can not be used autoclave

Well Plate Cover
■iP-TEC® Well Plate Cover
Code Model Quantity Price
28488 suitable for 6wells 1pc 41.00/USD
      Detail
28489 suitable for 6wells 10pc 369.00/USD
      Detail
28490 suitable for 12wells 1pc 41.00/USD
      Detail
28491 suitable for 12wells 10pc 369.00/USD
      Detail
28492 suitable for 24wells 1pc 41.00/USD
      Detail
28493 suitable for 24wells 10pc 369.00/USD
      Detail
28494 suitable for 96wells 1pc 41.00/USD
      Detail
28495 suitable for 96wells 10pc 369.00/USD
      Detail

●Have finished sterilzation ● Package separately. ●It can be used alcohol ●It can be used autoclave
●Size(mm)/for 6wells: 140×97×10H, for 12wells: 140×97×10H, for 24wells: 140×97×10H, for 96wells: 140×97×6H
●Material of cap: Medical grade silicone

  • Si
Plank for Well Plate
■iP-TEC® Plank for Well Plate
Code Model Quantity Price
28496 suitable for 6wells 1pc 69.00/USD
      Detail
28497 suitable for 6wells 10pc 621.00/USD
      Detail
28498 suitable for 12wells 10pc 75.00/USD
      Detail
28499 suitable for 12wells 10pc 675.00/USD
      Detail
28500 suitable for 24wells 1pc 82.00/USD
      Detail
28501 suitable for 24wells 10pc 738.00/USD
      Detail
28502 suitable for 96wells 1pc 137.00/USD
      Detail
28503 suitable for 96wells 10pc 1233.00/USD
      Detail

●nonsterile ●Package separately ●It can be used alcohol
●Size(mm)/for 6wells: 128×85×5H, for 12wells: 128×85×5H, for 24wells: 128×85×5H, for 96wells: 128×85×5H
●Material :PVC

  • PVC

注意

●Can not be used autoclave

iP-TEC® Secondary Container

Secondary Container

<Features>

●Polycarbonate secondary container, superb confidentiality and rigidness

●Shallow Design, easy to turnover plate and dish

●Design, possible to stacking

●Secondary container possible to keep inside carbon dioxide concentration about 5%, using Culture Pal® CO2(0.5L)

Spec

■iP-TEC® Secondary Container
Code Model Quantity Price  
28516 PC-0.5 1pc 109.00/USD Detail

●Alcohol sprayable ●Autoclaving possible ●Containers with vents also available(production on order)
●Size(mm)/192×150×40H ●Capacity (ℓ) / 0.5 ●Material/ main body: PC, metal clasps: SUS, packing: silicon rubber

  • PC
  • SUS
  • Si

注意

●When the secondary container is opened, the contents may fly out. Therefore, please remove the metal clasps while holding the lid down.

iP-TEC® Secondary Container Private Mesh Cushion

Secondary Container Private Mesh Cushion

<Features>

●It has a net-like structure, ensuring high gas permeability and cushioning property, and even higher holdability.

●We prepare two types of thickness according to the height of the container(Dish, Well Plate) to be used.

Spec

■iP-TEC® Secondary Container Private Mesh Cushion
Code Model Quantity Price  
28530 Thickness 20㎜ 1pc 7.00/USD Detail
28531 Thickness 30㎜ 1pc 7.00/USD Detail

●Please use after washing and autoclaving ●Size(mm)/130×90×20H ●Material/elastomer

  • OTHER

Barrier pouch

Barrier pouch

<Features>

●Pressure-resistant and hermetically-sealed pouch (secondary container) enabling the safe transport of clinical specimen and test specimen.

●Even in temperature range of 40℃~+55℃ with inner pressure of 95kPa, the contents will not leak (tested and proven in a third-party institution in Japan).

●With the newly-developed check-valve method, a high level of pressure resistance performance has been achieved (patent obtained). With this method which is not dependent on costly adhesives, low cost and price reduction can be attained simultaneously.

●Barrier pouch B4 can fit 1 iP-TEC container.

Spec

■Barrier pouch B4
Code Model Quantity Price
28628 BRP-B4-N 20sheets 135.00/USD
      Detail

●Outer dimensions (mm)/W260×H385 ●Inner dimensions (mm)/W240×H260

■Barrier pouch water-absorbing sheet
Code Model Quantity Price
28630 BRP-ABS 20sheets 60.00/USD
      Detail

●Size (mm)/250×330

CO2 gas concentration adjusting agent

CO2 gas concentration adjusting agent

Spec

■Culture PAL®CO2
Code Model Size Quantity Price
28542 CP-0.5L suitable for 0.5L 20pcs 105.00/USD Detail

●Culture PAL® is a registered trademark of MITSUBISHI GAS CHEMICAL COMPANY,INC.

  • OTHER

注意

●It produces few amount of aldehyde while using Culture PAL® CO2. Please confirm if it effects delivery process.

Live Transport device for flask

Flash-25 Mini Scraper

Primary container developed exclusively for iPS cell live transportation

Flash-25 Mini Scraper

After incubating iPS cell, when transporting in live condition, there is a risk that culture medium in flask get crisped and cell scaled. By filling a flask with culture medium it can be transported in safety without undulating. Yet, this will make the amount of culture medium increase and cost more with the conventional flask. To solve this, we created the revolutionary form which minify the amount of culture medium without changing its incubation area.

Safe transport is ensured by reducing the volume of the culture medium.

Compared with the general flask 25cm2 of which incubationarea is the same and IP-TEC® flask with filled(30ml)

    • [General flask]
    • ×culture medium iundulated.
    • ×culture medium get dried when tilted.
    • [iP-TEC® Flask-25]
    • ○culture medium always stable.
    • ○incubation surface does not get dried.

Compared to genaral flasks, cost of expensive culture medium is reduced by55~65%!!

Safe transport is ensured by reducing the volume of the culture medium.

Features of iP-TEC® Flask-25

  •  The design is user friendly for pipette and scraper.
    The design is user friendly for pipette and scraper.
  •  Safely stackable.
    Safely stackable.

Features of iP-TEC® Mini Scraper

  •  Its superb pliant shape and ingenious nose geometry make it possible to scrape out cells in every corner. This shape of iP-TEC® mini scraper with ease of grabbing enables nuanced movements.
    Its superb pliant shape and ingenious nose geometry make it possible to scrape out cells in every corner. This shape of iP-TEC® mini scraper with ease of grabbing enables nuanced movements.
  •  Product are packaged separately for ease of opening.
    Product are packaged separately for ease of opening.

Spec

■iP-TEC® Flask-25
Code Model Quantity Price
28445 P-25 100(10bag×10) 655.00/USD
      Detail

●Culture area:25cm2 ●Have finished hydrophillic treatment of culture surface and sterilization
●TOP: PE, BODY: Polystyrene ●Plug-seal type
●10pcs in one set with zipper seal ●Capacity: 30ml

■iP-TEC® Mini Scraper
Code Model Quantity Price
28448 150-13 100(10bag×10) 340.00/USD
      Detail

●Have finished sterilization
●Length of all: 150mm, Width od blade: 13mm
●Scrapers are packaged separately will be covered by film, when you unpack it, there won not be any trash or ash.

Secondary Container of Live-Transport

Flask could be keep in a stable condition! Can be stored in a box well organized.

 Flask could be keep in a stable condition! Can be stored in a box well organized.

There are 2 sets of holders in the containers which transport the flask in order to hold the flask still.

①Secondary container dedicated for transporting iP-TEC® flask-25.
Autoclaving possible.
②In order to hold iP-TEC flask. autoclave.
I
It can be used autoclave. Made by Polystyrene.
③Characteristic of sheet. Vibration control, liquid absorbing performance.
It can be used autoclave. 100% Cellulose.

Spec

■Secondary Container of Live-Transport
Code Model Quantity Price  
28451 1Set 1Set 37.00/USD Detail
28452 Pallet of Live-transport 12pcs 27.00/USD Detail
28453 Liquid Absorbing sheet 36pcs 98.00/USD Detail

●Content: secondary container of Live-transportX1, Pallet of Live-transportX2, Liquid Absorbing sheet×6
●Secondary container of size(mm): W210×D147×H70
●Secondary container of capacity: 1.3L
●Secondary container of body ,top and pallet: Polypropylene, Packing: silicone rubber, Liquid Absorbing sheet: Cellulose

Temperature Stabilizer

A high performance type, keeping temperature around 24℃
centigrade for long hours joining to our iP-TEC® series!v

Temperature Stabilizer (phase change matirial)-24

Patent Pending

It is particularly suitable for transporting under the same conditions as the environmental temperature of CPC and medical sites

 Safely stackable/Psssible to use repeatedly

Temperature control method depends on season(environment temperature at transportation)

●Please refer following table for suitable temperature and time. (Please control temperature than prescribed time as much as possible)

●Please use thermostatic device, hot storage, cooling box etc., possible to temperature control device. Possible to use indoor air conditioner.

●Upon temperature control, please do not pile heat storage material and arrange with capacity.

Season/
Temperature(Standard)
Summer/
Above 30degrees Centigrade
Winter/
below 20degrees Centigrade Spring
Spring, Autumn/
21 - 29 degrees Centigrade
Purpose Cooling Keep warm Cooling/Keep Warm
Temperature Control,
Temperature
(Degrees Centigrade)
22~23 26~27 24~24.5
Temperature Control, hours 6 8 6
Condition at the time of
Temperature Control
Solid
(White color, Opaque)
Liquid
(Transparence)
Mixture of Solid and Liquid
(Sherbet)

*In any case, please put briefly under room temperature after confirmation surface temperature on around 24 - 25 degrees centigrade.

*In case controlled surface temperature around below prescribed temperature, like heat storage material temperature on the morrow of temperature around 24 - 25 degrees centigrade, temperature in the box have possibility of temperature reduction.

→In such case, please put under room temperature condition on around one hour.

*In case controlled surface temperature around above prescribed temperature, like heat storage material temperature on the morrow of temperature around 24 - 25 degrees centigrade, temperature in the box have possibility of temperature rise.

→In such case, please put under room temperature condition on around one hour.

 

Available to use all transportation ●Ground Fire Protection Law: designated combustibles ●At sea: Ship Safety Law: Non dangerous goods ●Air: Aviation Law Non-dangerous goods

Spec

■iP-TEC® Temperature Stabilizer(phase change matirial)-24
Code Model Price  
28483 1pcs 137.00/USD Detail

●Source material:PVC ●Size(mm): 230×162×29H ●Capacity:480g ●It can be used alcohol

  • PVC

注意

●Please do not use autoclave and microwave oven

It can maintain a constant temperature at 36℃~33℃.

Temperature Stabilizer(phase change matirial)-36

Patent Pending

The Pallet shape Temperature Stabilizer that can be use
repeatedly for heating

 The Pallet shape Temperature Stabilizer that can be use repeatedly for heating

The temperature can be maintained constant at 36 degree.
Can be use repeatedly for heating, the shape is like a tray not only can transport cells but also act as a heating tray.

How to adjust the temperature

First of all, please leave the heat storage materials at intervals of 4 to 8 hours in an environment o f 45℃ (such as an incubator) and confirm that the material is completely liquid.
Next, please stand for 1 hour in an environment of 36℃ or 10~15 minutes at room temperature (20~25℃).
After that, please confirm that the surface temperature of Temperature Stabilizer has stabilized at 36℃.
For temperature adjustment, please use an incubator that can be set at 45℃.

  •  Can store two cell culture plate, and can also put in clean beach to keep warm temperature for analysis.
    ①Can store two cell culture plate, and can also put in clean beach to keep warm temperature for analysis.
  •  Safely stackable
    ②Safely stackable

Spec

■iP-TEC® Temperature Stabilizer(phase change matirial)-36
Code Model Price  
28454 1pcs 137.00/USD Detail

●Source material:PVC ●Size(mm): 230×162×29H ●Capacity:480g ●It can be used alcohol
(Caution) Can not be used autoclave.

BOX

Temperature-controlled transport box

Various types of iP-TEC can be selected for each purpose.

Premier BOX-V8.5

Premier BOX-V8.5

When Using Temperature Stabilizer-36,
150 hours or more (in enviloment temperature 25℃) keeping
77 hours(in enviloment temperature 5℃) keeping

Premier BOX-V8.5
New release of the V-8.5 thermostatic delivery box.
With a special R best technique ,remove gaps of vacuum insulation material.Allow body and the cover tightly closed vacuum to cut off heat, and using foam urethane which allows cutting off heat at its maximum.
Can be used with short or long distance and also in cold places.

Spec

■iP-TEC® Premier BOX-V8.5
Code Model Price  
28482 BOX only 1345.00/USD Detail
28481 Temperature Stabilizer-36 5pcs set 2030.00/USD Detail
28486 Temperature Stabilizer-24 5pcs set 2030.00/USD Detail

●Outer dimension(mm): W350×D300×H330
●Inner dimension(mm): W230×D175×H215
●Capacity of inside: 8.5L
●Weight: including latent heat storage material 5pcs… Approx.7kg, BOX only…3.5kg


For large-volume transport,
long distance transport by courier
or transport to cold climates

Optimum for low-cost transport

Premier BOX-V19

With a special R best technique ,remove gaps of vacuum insulation material.
Allow body and the cover tightly closed vacuum to cut off heat, and using foam urethane which allows cutting off heat at its maximum.
Great for far distance in cold weather condition usage.

When Using Temperature Stabilizer-36,
150 hours or more (in enviloment temperature 25℃) keeping
60 hours(in enviloment temperature 5℃) keeping

Standard BOX-X13

iP-TEC STANDARD BOX is made of economic and useful foamed styrol.
Special order is available.

When Using Temperature Stabilizer-36,
100 hours or more (in enviloment temperature 25℃) keeping
35 hours(in enviloment temperature 5℃) keeping

Spec

■iP-TEC® Premier BOX-V19
Code Model Price
28460 BOX only 1478.00/USD
    Detail
28462 Temperature Stabilizer-36 6pcs set 2300.00/USD
    Detail
28484 Temperature Stabilizer-24 6pcs set 2300.00/USD
    Detail

●Outer dimension(mm): 450×350×360H
●Inner dimension(mm): 330×235×250H
●Capacity of inside: 19.4L

■iP-TEC® Standard BOX-X13
Code Model Price
28463 BOX only 438.00/USD
    Detail
28465 Temperature Stabilizer-36 6pcs set 1260.00/USD
    Detail
28485 Temperature Stabilizer-24 6pcs set 1260.00/USD
    Detail

●Outer dimension(mm): 366×356×394H
●Inner dimension(mm): 236×226×244H
●Capacity of inside: 13L
●Source material(inner): aluminum evaporation foamed polyethylene.
●Source material(coater): EPDM

Temperature holding test

After setting 6 pieces Temperature Stabilizer-36 into Premier BOX-V19 and Standard BOX-X13, we tested its ability of maintaining temperature inside flask that is set in a box under the fixed condition for environmental temperature at 25℃ and 5℃.
*Test has been started right after letting thermal storage medium melted at 45℃, in the actual use, please put it into the box after surface temperature is settled at 36℃.


V8.5

For short-distance transport between buildings and facilities

Light BOX-S6.6

When Using Temperature Stabilizer-36,36 hours or more (in enviloment temperature 25℃) keeping10 hours (in enviloment temperature 5℃) keeping

25℃ environment temperature-controlled test data

When Using Temperature Stabilizer-36, 36 hours (in enviloment temperature 25℃) keeping. Set 2 latent Temperature Stabilizer (Phase Change Material)-36.

* The test is started immediately after melting the Temperature Stabilizer at 45℃, but in practical use please put in the BOX after the surface temperature of the Temperature Stabilizer has stabilized at 36℃.

Because the cultivation temperature is kept for a short time by a combination of heat retention box and Temperature Stabilizer, it is ideal for short time transport such as transport between facilities.

Voices
I would like to transport specimens and cells as they are in a cultured state when using equipment in the research building apart from the laboratory. It is more reliable that I can evaluate correctly with less damage.

Combination of Light BOX-S6.6 and Temperature Stabilizer-36

Check!
How to use
Please use the heat storage material sandwiching the prescribed container vertically and put it in the BOX.

Spec

■iP-TEC® Light BOX-S6.6
Code Model Price
28466 Temperature Stabilizer-36 2pcs set 405.00/USD
    Detail
28487 Temperature Stabilizer-24 2pcs set 405.00/USD
    Detail

●Outer dimension (mm): W299×D268×H197
●Inner dimension (mm): W240×D160×H130
●Weight: Temperature Stabilizer 2pcs Set: 1.5㎏, BOX only:0.2㎏

The contents of this casual tote bag are cells!?
For casual use in short-distance transport.

Tote BOX-6.6

 Tote BOX-6.6
 Tote BOX-6.6

This was made based on our request

― A tote bag-type transport box was made based on your request. What is your opinion?

W:

It’s light, completely dif ferent from the previous types.

I:

It’s so light, lighter than my bag! I think we requested a bag that is half the size (of Premier BOX -V8.5). I feel it is much more compact overall.

― The size is as per your request.

I:

It feels light. We put Temperature Stabilizer (Phase Change Material) in this, right?

W:

So we put the secondary container between the Temperature Stabilizer (Phase Change Material)?

― That’s right.

I:

What is the weight of the Temperature Stabilizer (Phase Change Material)?

― It is about 650 grams (per sheet).

W/I:

Hmm (thinking).

W:

It is still light.

I:

The top part has a string which ties the bag. Is this okay as is? Is this the completed product?

― We can make improvements if there are any problems. (In terms of performance) there is no particular problem. What do you think about the tote bag-like appearance?

W:

You can use this outside like a normal bag. It doesn’t look like you are carrying cells. I think it looks normal.

I:

It’s light, so you can use it not only outside but also in the laboratory.

― Do you worry about what other’s think when you’re on the train?

W/I:

Yes, we do.

― Then, that’s good. This (tote bag-type product) is not necessarily the completed product, but by continuing to receive customer feedback, we can improve our products. Your continued support is appreciated.

W/I:

Likewise.

Test data measurement points
25℃ environment temperature-controlled test data
5℃ environment temperature-controlled test data

<Features>

●This is a tertiary bag custom made for hand-carry when the researchers themselves transport the cells.

●The appearance is that of an ordinary bag! Therefore, it does not stand out when carrying it on public transportation.

●The weight is approximately 3 kg even with Temperature Stabilizer (Phase Change Material). There is no problem carrying it by oneself.

Spec

■iP-TEC® Tote BOX-6.6
Code Model Price  
28543 BOXのみ 440.00/USD Detail

●Dimensions (mm)/BOX external dimensions: 340×230×H247, internal dimensions: 240×170×H130 ●Materials/ bag: polyester ●Capacity/6.6ℓ ●Weight/BOX only: approx. 830g

Incubator for Temperature Stabilizer

Temperature controlling device for heat storage that may be set
between -15~50℃.
Programmed operation is also possible.

Incubator for Temperature Stabilizer (Phase Change Material) -15~50℃ Type

 Incubator for Temperature Stabilizer (Phase Change Material) -15~50℃ Type

<Features>

●A wide range of temperature between -15 ~ 50℃ may be set, optimum for temperature control of the Temperature Stabilizer (Phase Change Material) in various temperature ranges.

●Programmed operation is possible (8 steps, 2 patterns), enabling a semi-automatic and efficient temperature control of Temperature Stabilizer (Phase Change Material) (heating/cooling, suitable temperature keep key).

●With a microcomputer automatic warning device, a warning message will be shown on the digital display and an alarm will be set off in the event of temperature abnormality.

●The timer display is in 1-minute units, facilitating time setting and confirmation. Additionally, with the operating monitor LED, the operation status can be seen at a glance.

●It has a user-friendly, left-opening door.

●Using a separately-available “for 8-sheet heat storage rack”, uniform temperature can be maintained on the Temperature Stabilizer (Phase Change Material) surface. If the racks are placed on the top and bottom, simultaneous temperature control of 16 Temperature Stabilizer (Phase Change Material) is possible.

Temperature control method using dedicated racks

 Temperature control method using dedicated racks

Allowing space between the Temperature Stabilizer (Phase Change Material) is the key to temperature control. If the dedicated racks are set on both the top and bottom, temperature control of a maximum of 16 sheets is possible.

Rack for 8 sheets of Temperature Stabilizer (Phase Change Material)

Spec

■Incubator for Temperature Stabilizer (Phase Change Material) -15~50℃ Type
Code Model Price  
28521 HC-INC50 4080.00/USD Detail
28522 1pc Temperature Stabilizer (Phase Change Material) rack (8-sheet type) 109.00/USD Detail

●Size (mm)/outer dimensions: W483×D487 (554)×H685 (number in brackets show maximum dimensions including protrusions), Inner dimensions: W400xD335×H370
●Effective internal capacity/50ℓ
●Attachments/1 shelf plates
●Weight/approx. 40 ㎏
●Temperature range/-15 ~ 50℃
●Power source/applied breaker capacity: single phase 100V 10A, outlet type: grounded, 2 poles 15A 125V

Caution

●Racks for Temperature Stabilizer (Phase Change Material) are sold separately.

By combining Premier BOX-V19 and a heater unit,
the temperature of Temperature Stabilizer-36 can be adjusted.

Heater Unit for Temperature Stabilizer-36  (Premier BOX and TS-36 6pcs Set)

 Heater Unit for Temperature Stabilizer-36  (Premier BOX and TS-36 6pcs Set)

<Features>

●It is a simple temperature control set dedicated to “iP-TEC® Temperature Stabilizer (Phase Change Material)-36.”

●It is used by placing the heater unit into the iP-TEC® Premier BOX-V19.

●When the temperature control dial is set to “middle,” the inner temperature of the unit becomes a 47℃ environment. In this environment, the Temperature Stabilizer (Phase Change Material)-36 will melt completely in approximately 7~8 hours (regarding the temperature control method after the melting of the latent heat control material-36, refer to the explanation of the Temperature Stabilizer (Phase Change Material)),

●Temperature control of up to 6 Temperature Stabilizer (Phase Change Material) is possible at one time. Please use the attached dedicated rack.

With a dedicated rack, temperature control ofTemperature Stabilizer
(Phase Change Material)-36 is possible.

 With a dedicated rack, temperature control ofTemperature Stabilizer
 Attachments

Spec

■Heater Unit for Temperature Stabilizer-36 (Premier BOX and TS-36 6pcs Set)
Code Model Price  
28524 HU-BOX19-36 3660.00/USD Detail

●Set contents/1 heater unit, 1 unit of iP-TEC® Premier BOX-V19, 6 Temperature Stabilizer(Phase Change Material), 1 rack for 6 Temperature Stabilizer (Phase Change Material) ●Outer dimensions when set up (mm)/W450×D350×H420
■Heater unit…●Outer dimensions (mm)/W420×D335×H68(excludes handle) ●Weight/approx. 4.5 ㎏ ●Heater/mica heater 100V 130W ●Power source/AC100V 50/60Hz ●Power consumption/approx. 140W ●Unit material/SUS304

CELL TRANSPORT CONTAINER #RPE12

PAT. P

CELL TRANSPORT CONTAINER #RPE12

●It is suitable for culturing / transporting sheet cells

●Simple structure of only 3 parts !

●For transwell® of 12 well

●The effect of the inner silicon device realizes the sealing
of the container and protects delicate cells

●Medical silicon use ( USP class Ⅵ, ISO10993-5 correspondence)

●Minimize expensive cell culture medium (Approximately 8 ml in full)

Structure image. Medical silicon device has insert holder and thin gaspermeation area on the base.

Set Procedure

Set Procedure

Outer container type

Outer container type

MOVIE

PAGE TOP